1 = Installing the Evergreen server =
4 == Preamble: referenced user accounts ==
6 In subsequent sections, we will refer to a number of different accounts, as
10 ** The *user* Linux account is the account that you use to log onto the
11 Linux system as a regular user.
12 ** The *root* Linux account is an account that has system administrator
13 privileges. On Debian you can switch to this account from
14 your *user* account by issuing the `su -` command and entering the
15 password for the *root* account when prompted. On Ubuntu you can switch
16 to this account from your *user* account using the `sudo su -` command
17 and entering the password for your *user* account when prompted.
18 ** The *opensrf* Linux account is an account that you create when installing
19 OpenSRF. You can switch to this account from the *root* account by
20 issuing the `su - opensrf` command.
21 ** The *postgres* Linux account is created automatically when you install
22 the PostgreSQL database server. You can switch to this account from the
23 *root* account by issuing the `su - postgres` command.
24 * PostgreSQL user accounts:
25 ** The *evergreen* PostgreSQL account is a superuser account that you will
26 create to connect to the PostgreSQL database server.
27 * Evergreen administrator account:
28 ** The *egadmin* Evergreen account is an administrator account for
29 Evergreen that you will use to test connectivity and configure your
32 == Preamble: developer instructions ==
35 Skip this section if you are using an official release tarball downloaded
36 from http://evergreen-ils.org/egdownloads
38 Developers working directly with the source code from the Git repository,
39 rather than an official release tarball, must perform one step before they
40 can proceed with the `./configure` step.
42 As the *user* Linux account, issue the following command in the Evergreen
43 source directory to generate the configure script and Makefiles:
46 ------------------------------------------------------------------------------
48 ------------------------------------------------------------------------------
50 == Installing prerequisites ==
52 * **PostgreSQL**: The minimum supported version is 10.
53 * **Linux**: Evergreen has been tested on
57 Ubuntu Focal Fossa (20.04),
58 and Ubuntu Bionic Beaver (18.04).
59 If you are running an older version of these distributions, you may want
60 to upgrade before upgrading Evergreen. For instructions on upgrading these
61 distributions, visit the Debian or Ubuntu websites.
62 * **OpenSRF**: The minimum supported version of OpenSRF is 3.2.0.
65 Evergreen has a number of prerequisite packages that must be installed
66 before you can successfully configure, compile, and install Evergreen.
68 1. Begin by installing the most recent version of OpenSRF (3.2.0 or later).
69 You can download OpenSRF releases from http://evergreen-ils.org/opensrf-downloads/
71 2. Issue the following commands as the *root* Linux account to install
72 prerequisites using the `Makefile.install` prerequisite installer,
73 substituting `debian-bullseye`,`debian-buster`,`debian-stretch`,`ubuntu-focal`,
74 or `ubuntu-bionic` for <osname> below:
77 ------------------------------------------------------------------------------
78 make -f Open-ILS/src/extras/Makefile.install <osname>
79 ------------------------------------------------------------------------------
81 [[optional_developer_additions]]
82 3. OPTIONAL: Developer additions
84 To perform certain developer tasks from a Git source code checkout,
85 additional packages are required. As the *root* Linux account:
87 * To install packages needed for retrieving and managing web dependencies,
88 use the <osname>-developer Makefile.install target. Currently,
89 this is only needed for building and installing the web
91 * To optionally run Angular and AngularJS tests you will need to manually
92 install Firefox and your choice of Chromium or Chrome.
95 ------------------------------------------------------------------------------
96 make -f Open-ILS/src/extras/Makefile.install <osname>-developer
97 ------------------------------------------------------------------------------
99 * To install packages required for building Evergreen translations, use
100 the <osname>-translator Makefile.install target.
103 ------------------------------------------------------------------------------
104 make -f Open-ILS/src/extras/Makefile.install <osname>-translator
105 ------------------------------------------------------------------------------
107 * To install packages required for building Evergreen release bundles, use
108 the <osname>-packager Makefile.install target.
111 ------------------------------------------------------------------------------
112 make -f Open-ILS/src/extras/Makefile.install <osname>-packager
113 ------------------------------------------------------------------------------
115 == Extra steps for web staff client ==
118 Skip this entire section if you are using an official release tarball downloaded
119 from http://evergreen-ils.org/downloads. Otherwise, ensure you have installed the
120 xref:#optional_developer_additions[optional developer additions] before proceeding.
122 [[install_files_for_web_staff_client]]
123 === Install AngularJS files for web staff client ===
125 1. Building, Testing, Minification: The remaining steps all take place within
126 the staff JS web root:
129 ------------------------------------------------------------------------------
130 cd $EVERGREEN_ROOT/Open-ILS/web/js/ui/default/staff/
131 ------------------------------------------------------------------------------
133 2. Install Project-local Dependencies. npm inspects the 'package.json' file
134 for dependencies and fetches them from the Node package network.
137 ------------------------------------------------------------------------------
138 npm install # fetch JS dependencies
139 ------------------------------------------------------------------------------
141 3. Run the build script.
144 ------------------------------------------------------------------------------
146 ------------------------------------------------------------------------------
148 4. OPTIONAL: Test web client code if the <osname>-developer packages and
149 the necessary browsers are installed.
150 CHROME_BIN should be set to the path to chrome or chromimum, e.g.,
154 ------------------------------------------------------------------------------
155 CHROME_BIN=/path/to/chrome npm run test
156 ------------------------------------------------------------------------------
158 [[install_files_for_angular_web_staff_client]]
159 === Install Angular files for web staff client ===
161 1. Building, Testing, Minification: The remaining steps all take place within
162 the Angular staff root:
165 ------------------------------------------------------------------------------
166 cd $EVERGREEN_ROOT/Open-ILS/src/eg2/
167 ------------------------------------------------------------------------------
169 2. Install Project-local Dependencies. npm inspects the 'package.json' file
170 for dependencies and fetches them from the Node package network.
173 ------------------------------------------------------------------------------
174 npm install # fetch JS dependencies
175 ------------------------------------------------------------------------------
177 3. Run the build script.
180 ------------------------------------------------------------------------------
182 ------------------------------------------------------------------------------
184 4. OPTIONAL: Test eg2 web client code if the <osname>-developer packages and
185 the necessary browsers are installed:
186 CHROME_BIN should be set to the path to chrome or chromimum, e.g.,
190 ------------------------------------------------------------------------------
191 CHROME_BIN=/path/to/chrome npm run test
192 ------------------------------------------------------------------------------
194 [[install_opac_deps]]
195 === Install OPAC skin dependencies ===
197 1. The following steps take place within the OPAC dependencies root:
200 ------------------------------------------------------------------------------
201 cd $EVERGREEN_ROOT/Open-ILS/web/opac/deps
202 ------------------------------------------------------------------------------
204 2. Install Project-local Dependencies. npm inspects the 'package.json' file
205 for dependencies and fetches them from the Node package network.
208 ------------------------------------------------------------------------------
209 npm install # fetch JS and CSS dependencies
210 ------------------------------------------------------------------------------
212 Note that there is no build step.
214 == Configuration and compilation instructions ==
216 For the time being, we are still installing everything in the `/openils/`
217 directory. From the Evergreen source directory, issue the following commands as
218 the *user* Linux account to configure and build Evergreen:
221 ------------------------------------------------------------------------------
222 PATH=/openils/bin:$PATH ./configure --prefix=/openils --sysconfdir=/openils/conf
224 ------------------------------------------------------------------------------
226 These instructions assume that you have also installed OpenSRF under `/openils/`.
227 If not, please adjust PATH as needed so that the Evergreen `configure` script
228 can find `osrf_config`.
230 == Installation instructions ==
232 1. Once you have configured and compiled Evergreen, issue the following
233 command as the *root* Linux account to install Evergreen and copy
234 example configuration files to `/openils/conf`.
237 ------------------------------------------------------------------------------
239 ------------------------------------------------------------------------------
241 == Change ownership of the Evergreen files ==
243 All files in the `/openils/` directory and subdirectories must be owned by the
244 `opensrf` user. Issue the following command as the *root* Linux account to
245 change the ownership on the files:
248 ------------------------------------------------------------------------------
249 chown -R opensrf:opensrf /openils
250 ------------------------------------------------------------------------------
254 On Ubuntu 18.04 / 20.04 or Debian Stretch / Buster / Bullseye, run the
255 following command as the root user:
258 ------------------------------------------------------------------------------
260 ------------------------------------------------------------------------------
262 == Additional Instructions for Developers ==
265 Skip this section if you are using an official release tarball downloaded
266 from http://evergreen-ils.org/egdownloads
268 Developers working directly with the source code from the Git repository,
269 rather than an official release tarball, need to install the Dojo Toolkit
270 set of JavaScript libraries. The appropriate version of Dojo is included in
271 Evergreen release tarballs. Developers should install the Dojo 1.3.3 version
272 of Dojo by issuing the following commands as the *opensrf* Linux account:
275 ------------------------------------------------------------------------------
276 wget http://download.dojotoolkit.org/release-1.3.3/dojo-release-1.3.3.tar.gz
277 tar -C /openils/var/web/js -xzf dojo-release-1.3.3.tar.gz
278 cp -r /openils/var/web/js/dojo-release-1.3.3/* /openils/var/web/js/dojo/.
279 ------------------------------------------------------------------------------
282 == Configure the Apache Web server ==
284 . Use the example configuration files to configure your Web server for
285 the Evergreen catalog, web staff client, Web services, and administration
286 interfaces. Issue the following commands as the *root* Linux account:
289 ------------------------------------------------------------------------------------
290 cp Open-ILS/examples/apache_24/eg_24.conf /etc/apache2/sites-available/eg.conf
291 cp Open-ILS/examples/apache_24/eg_vhost_24.conf /etc/apache2/eg_vhost.conf
292 cp Open-ILS/examples/apache_24/eg_startup /etc/apache2/
294 mkdir /etc/apache2/ssl
296 ------------------------------------------------------------------------------------
298 . The `openssl` command cuts a new SSL key for your Apache server. For a
299 production server, you should purchase a signed SSL certificate, but you can
300 just use a self-signed certificate and accept the warnings in the
301 and browser during testing and development. Create an SSL key for the Apache
302 server by issuing the following command as the *root* Linux account:
305 ------------------------------------------------------------------------------
306 openssl req -new -x509 -days 365 -nodes -out server.crt -keyout server.key
307 ------------------------------------------------------------------------------
309 . As the *root* Linux account, edit the `eg.conf` file that you copied into
311 a. To enable access to the offline upload / execute interface from any
312 workstation on any network, make the following change (and note that
313 you *must* secure this for a production instance):
314 * Replace `Require host 10.0.0.0/8` with `Require all granted`
315 . Change the user for the Apache server.
316 * As the *root* Linux account, edit
317 `/etc/apache2/envvars`. Change `export APACHE_RUN_USER=www-data` to
318 `export APACHE_RUN_USER=opensrf`.
319 . As the *root* Linux account, configure Apache with KeepAlive settings
320 appropriate for Evergreen. Higher values can improve the performance of a
321 single client by allowing multiple requests to be sent over the same TCP
322 connection, but increase the risk of using up all available Apache child
323 processes and memory.
324 * Edit `/etc/apache2/apache2.conf`.
325 a. Change `KeepAliveTimeout` to `1`.
326 b. Change `MaxKeepAliveRequests` to `100`.
327 . As the *root* Linux account, configure the prefork module to start and keep
328 enough Apache servers available to provide quick responses to clients without
329 running out of memory. The following settings are a good starting point for a
330 site that exposes the default Evergreen catalog to the web:
332 .`/etc/apache2/mods-available/mpm_prefork.conf`
334 ------------------------------------------------------------------------------
335 <IfModule mpm_prefork_module>
340 MaxConnectionsPerChild 500
342 ------------------------------------------------------------------------------
344 . As the *root* user, enable the mpm_prefork module:
347 ------------------------------------------------------------------------------
350 ------------------------------------------------------------------------------
352 . As the *root* Linux account, enable the Evergreen site:
355 ------------------------------------------------------------------------------
356 a2dissite 000-default # OPTIONAL: disable the default site (the "It Works" page)
358 ------------------------------------------------------------------------------
360 . As the *root* Linux account, enable Apache to write
361 to the lock directory; this is currently necessary because Apache
362 is running as the `opensrf` user:
365 ------------------------------------------------------------------------------
366 chown opensrf /var/lock/apache2
367 ------------------------------------------------------------------------------
369 Learn more about additional Apache options in the following sections:
371 * xref:admin:apache_rewrite_tricks.adoc#apache_rewrite_tricks[Apache Rewrite Tricks]
372 * xref:admin:apache_access_handler.adoc#apache_access_handler_perl_module[Apache Access Handler Perl Module]
374 == Configure OpenSRF for the Evergreen application ==
376 There are a number of example OpenSRF configuration files in `/openils/conf/`
377 that you can use as a template for your Evergreen installation. Issue the
378 following commands as the *opensrf* Linux account:
381 ------------------------------------------------------------------------------
382 cp -b /openils/conf/opensrf_core.xml.example /openils/conf/opensrf_core.xml
383 cp -b /openils/conf/opensrf.xml.example /openils/conf/opensrf.xml
384 ------------------------------------------------------------------------------
386 When you installed OpenSRF, you created four Jabber users on two
387 separate domains and edited the `opensrf_core.xml` file accordingly. Please
388 refer back to the OpenSRF README and, as the *opensrf* Linux account, edit the
389 Evergreen version of the `opensrf_core.xml` file using the same Jabber users
390 and domains as you used while installing and testing OpenSRF.
393 The `-b` flag tells the `cp` command to create a backup version of the
394 destination file. The backup version of the destination file has a tilde (`~`)
395 appended to the file name, so if you have forgotten the Jabber users and
396 domains, you can retrieve the settings from the backup version of the files.
398 `eg_db_config`, described in xref:#creating_the_evergreen_database[Creating the Evergreen database], sets the database connection information in `opensrf.xml` for you.
400 === Configure action triggers for the Evergreen application ===
401 _Action Triggers_ provide hooks for the system to perform actions when a given
402 event occurs; for example, to generate reminder or overdue notices, the
403 `checkout.due` hook is processed and events are triggered for potential actions
404 if there is no checkin time.
406 To enable the default set of hooks, issue the following command as the
407 *opensrf* Linux account:
410 ------------------------------------------------------------------------------
411 cp -b /openils/conf/action_trigger_filters.json.example /openils/conf/action_trigger_filters.json
412 ------------------------------------------------------------------------------
414 For more information about configuring and running action triggers, see
415 xref:admin:actiontriggers_process.adoc#processing_action_triggers[Notifications / Action Triggers].
417 [[creating_the_evergreen_database]]
418 == Creating the Evergreen database ==
420 === Setting up the PostgreSQL server ===
422 For production use, most libraries install the PostgreSQL database server on a
423 dedicated machine. Therefore, by default, the `Makefile.install` prerequisite
424 installer does *not* install the PostgreSQL database server that is required
425 by every Evergreen system. You can install the packages required by Debian or
426 Ubuntu on the machine of your choice using the following commands as the
427 *root* Linux account:
429 . Installing PostgreSQL server packages
431 Each OS build target provides the postgres server installation
432 packages required for each operating system. To install Postgres
433 server packages, use the make target
434 'postgres-server-<OSTYPE>-<POSTGRESVERSION>'. Choose the most
435 appropriate command below based on your operating system and desired
438 The first below will install PostgreSQL 10, the minimum supported
439 version and the version recommended for production use of Evergreen:
442 ------------------------------------------------------------------------------
443 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-10
444 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-10
445 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-stretch-10
446 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-bionic-10
447 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-10
448 ------------------------------------------------------------------------------
452 Evergreen support for PostgreSQL server versions greater than 10 is
453 still exprimental. The use of the following is discouraged in
454 production environments. The following are only recommended if you
455 are willing to test newer PostgreSQL versions for performance and
459 To install PostgreSQL version 11, use the following command for your operating
463 ------------------------------------------------------------------------------
464 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-11
465 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-11
466 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-stretch-11
467 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-bionic-11
468 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-11
469 ------------------------------------------------------------------------------
471 To install PostgreSQL version 12, use the following command for your operating
475 ------------------------------------------------------------------------------
476 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-12
477 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-12
478 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-stretch-12
479 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-bionic-12
480 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-12
481 ------------------------------------------------------------------------------
483 To install PostgreSQL version 13, use the following command for your operating
487 ------------------------------------------------------------------------------
488 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-13
489 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-13
490 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-stretch-13
491 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-bionic-13
492 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-13
493 ------------------------------------------------------------------------------
495 To install PostgreSQL version 14, use the following command for your operating
499 ------------------------------------------------------------------------------
500 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-14
501 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-14
502 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-stretch-14
503 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-bionic-14
504 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-14
505 ------------------------------------------------------------------------------
507 For a standalone PostgreSQL server, install the following Perl modules for your
508 distribution as the *root* Linux account:
511 No extra modules required for these distributions.
513 You need to create a PostgreSQL superuser to create and access the database.
514 Issue the following command as the *postgres* Linux account to create a new
515 PostgreSQL superuser named `evergreen`. When prompted, enter the new user's
519 ------------------------------------------------------------------------------
520 createuser -s -P evergreen
521 ------------------------------------------------------------------------------
523 .Enabling connections to the PostgreSQL database
525 Your PostgreSQL database may be configured by default to prevent connections,
526 for example, it might reject attempts to connect via TCP/IP or from other
527 servers. To enable TCP/IP connections from localhost, check your `pg_hba.conf`
528 file, found in the `/etc/postgresql/` directory on Debian and Ubuntu.
529 A simple way to enable TCP/IP
530 connections from localhost to all databases with password authentication, which
531 would be suitable for a test install of Evergreen on a single server, is to
532 ensure the file contains the following entries _before_ any "host ... ident"
535 ------------------------------------------------------------------------------
536 host all all ::1/128 md5
537 host all all 127.0.0.1/32 md5
538 ------------------------------------------------------------------------------
540 When you change the `pg_hba.conf` file, you will need to reload PostgreSQL to
541 make the changes take effect. For more information on configuring connectivity
543 http://www.postgresql.org/docs/devel/static/auth-pg-hba-conf.html
545 === Creating the Evergreen database and schema ===
547 Once you have created the *evergreen* PostgreSQL account, you also need to
548 create the database and schema, and configure your configuration files to point
549 at the database server. Issue the following command as the *root* Linux account
550 from inside the Evergreen source directory, replacing <user>, <password>,
551 <hostname>, <port>, and <dbname> with the appropriate values for your
552 PostgreSQL database (where <user> and <password> are for the *evergreen*
553 PostgreSQL account you just created), and replace <admin-user> and <admin-pass>
554 with the values you want for the *egadmin* Evergreen administrator account:
557 ------------------------------------------------------------------------------
558 perl Open-ILS/src/support-scripts/eg_db_config --update-config \
559 --service all --create-database --create-schema --create-offline \
560 --user <user> --password <password> --hostname <hostname> --port <port> \
561 --database <dbname> --admin-user <admin-user> --admin-pass <admin-pass>
562 ------------------------------------------------------------------------------
564 This creates the database and schema and configures all of the services in
565 your `/openils/conf/opensrf.xml` configuration file to point to that database.
566 It also creates the configuration files required by the Evergreen `cgi-bin`
567 administration scripts, and sets the user name and password for the *egadmin*
568 Evergreen administrator account to your requested values.
570 You can get a complete set of options for `eg_db_config` by passing the
573 === Loading sample data ===
575 If you add the `--load-all-sample` parameter to the `eg_db_config` command,
576 a set of authority and bibliographic records, call numbers, copies, staff
577 and regular users, and transactions will be loaded into your target
578 database. This sample dataset is commonly referred to as the _concerto_
579 sample data, and can be useful for testing out Evergreen functionality and
580 for creating problem reports that developers can easily recreate with their
581 own copy of the _concerto_ sample data.
583 === Creating the database on a remote server ===
585 In a production instance of Evergreen, your PostgreSQL server should be
586 installed on a dedicated server.
588 To create the database instance on a remote database server, simply
589 use the `--create-database` flag on `eg_db_config`.
591 == Starting Evergreen ==
593 1. As the *root* Linux account, start the `memcached` and `ejabberd` services
594 (if they aren't already running):
597 ------------------------------------------------------------------------------
598 /etc/init.d/ejabberd start
599 /etc/init.d/memcached start
600 ------------------------------------------------------------------------------
602 2. As the *opensrf* Linux account, start Evergreen. The `-l` flag in the
603 following command is only necessary if you want to force Evergreen to treat the
604 hostname as `localhost`; if you configured `opensrf.xml` using the real
605 hostname of your machine as returned by `perl -ENet::Domain 'print
606 Net::Domain::hostfqdn() . "\n";'`, you should not use the `-l` flag.
609 ------------------------------------------------------------------------------
610 osrf_control -l --start-all
611 ------------------------------------------------------------------------------
613 ** If you receive the error message `bash: osrf_control: command not found`,
614 then your environment variable `PATH` does not include the `/openils/bin`
615 directory; this should have been set in the *opensrf* Linux account's
616 `.bashrc` configuration file. To manually set the `PATH` variable, edit the
617 configuration file `~/.bashrc` as the *opensrf* Linux account and add the
621 ------------------------------------------------------------------------------
622 export PATH=$PATH:/openils/bin
623 ------------------------------------------------------------------------------
625 3. As the *opensrf* Linux account, generate the Web files needed by the web staff
626 client and catalog and update the organization unit proximity (you need to do
627 this the first time you start Evergreen, and after that each time you change the library org unit configuration.
631 ------------------------------------------------------------------------------
633 ------------------------------------------------------------------------------
635 4. As the *root* Linux account, restart the Apache Web server:
638 ------------------------------------------------------------------------------
639 /etc/init.d/apache2 restart
640 ------------------------------------------------------------------------------
642 If the Apache Web server was running when you started the OpenSRF services, you
643 might not be able to successfully log in to the OPAC or web staff client until the
644 Apache Web server is restarted.
646 == Testing connections to Evergreen ==
648 Once you have installed and started Evergreen, test your connection to
649 Evergreen via `srfsh`. As the *opensrf* Linux account, issue the following
650 commands to start `srfsh` and try to log onto the Evergreen server using the
651 *egadmin* Evergreen administrator user name and password that you set using the
652 `eg_db_config` command:
655 ------------------------------------------------------------------------------
657 srfsh% login <admin-user> <admin-pass>
658 ------------------------------------------------------------------------------
660 You should see a result like:
662 Received Data: "250bf1518c7527a03249858687714376"
663 ------------------------------------
664 Request Completed Successfully
665 Request Time in seconds: 0.045286
666 ------------------------------------
670 "textcode":"SUCCESS",
673 "stacktrace":"oils_auth.c:304",
675 "authtoken":"e5f9827cc0f93b503a1cc66bee6bdd1a",
681 ------------------------------------
682 Request Completed Successfully
683 Request Time in seconds: 1.336568
684 ------------------------------------
685 [[install-troubleshooting-1]]
686 If this does not work, it's time to do some troubleshooting.
688 * As the *opensrf* Linux account, run the `settings-tester.pl` script to see
689 if it finds any system configuration problems. The script is found at
690 `Open-ILS/src/support-scripts/settings-tester.pl` in the Evergreen source
692 * Follow the steps in the http://evergreen-ils.org/dokuwiki/doku.php?id=troubleshooting:checking_for_errors[troubleshooting guide].
693 * If you have faithfully followed the entire set of installation steps
694 listed here, you are probably extremely close to a working system.
695 Gather your configuration files and log files and contact the
696 http://evergreen-ils.org/communicate/mailing-lists/[Evergreen development
697 mailing list] for assistance before making any drastic changes to your system
702 Need help installing or using Evergreen? Join the mailing lists at
703 http://evergreen-ils.org/communicate/mailing-lists/ or contact us on the Freenode
704 IRC network on the #evergreen channel.
708 This work is licensed under the Creative Commons Attribution-ShareAlike 3.0
709 Unported License. To view a copy of this license, visit
710 http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative
711 Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.