--- /dev/null
+#!/usr/bin/perl -w
+
+# Converts a Unicorn users.data, bill.data, or charge.data file to a tab-separated file.
+# 2009-08-10 Ben Ostrowsky <ben@esilibrary.com>
+
+my @records;
+my $serial = -1;
+my $line = 0;
+my $section = '';
+my $field = '';
+my %unique_fields;
+
+
+# Load each record
+while (<>) {
+ s/\r\n/\n/g;
+# print STDERR "Loaded this line: " . $_;
+
+ # Is this the start of a new record?
+ if ( /^... DOCUMENT BOUNDARY ...$/ ) {
+ $line = 0;
+ $serial++;
+ $section = ''; # just in case this didn't get reset in the previous record
+ # print STDERR "Processing record $serial.\n";
+ next;
+ }
+
+ # Is this a FORM= line (which can be ignored)?
+ if ( /^FORM=/ ) {
+ next;
+ }
+
+ # If this isn't the start of the new record, it's a new line in the present record.
+ $line++;
+
+ # Is this line the beginning of a block of data (typically an address or a note)?
+ if ( /^\.(.*?)_BEGIN.$/ ) {
+ # print STDERR "I think this might be the beginning of a beautiful " . $1 . ".\n";
+ $section = "$1.";
+ next;
+ }
+
+ # Is this line the beginning of a block of data (typically an address or a note)?
+ if ( /^\.(.*?)_END.$/ ) {
+ if ("$1." ne $section) {
+ print STDERR "Error in record $serial, line $line (input line $.): got an end-of-$1 but I thought I was in a $section block!\n";
+ }
+ # print STDERR "It's been fun, guys, but... this is the end of the " . $1 . ".\n";
+ $section = '';
+ next;
+ }
+
+ # Looks like we've got some actual data! Let's store it.
+ # FIXME: For large batches of data, we may run out of memory and should store this on disk.
+ if ( /^\.(.*?).\s+(\|a)?(.*)$/ ) {
+
+ # Build the name of this field (taking note of whether we're in a named section of data)
+ $field = '';
+ if ($section ne '') {
+ $field .= $section;
+ }
+ $field .= $1;
+
+ # Store the field as a key of an array. If it already exists, oh well, now it still exists.
+ $unique_fields{$field} = 1;
+
+ # Now we can actually store this line of data!
+ $records[$serial]{$field} = $3;
+
+ # print STDERR "Data extracted: \$records[$serial]{'$field'} = '$3'\n";
+
+ next;
+ }
+
+ # This is the continuation of the previous line.
+ else {
+ chomp($_);
+ $records[$serial]{$field} .= ' ' . $_;
+ # print STDERR "Appended data to previous field. \$records[$serial]{'$field'} is now '" . $records[$serial]{$field} . "'.\n";
+ }
+
+}
+
+print STDERR "Loaded " . scalar(@records) . " records.\n";
+
+# We're aiming to produce output that can be slurped in by this SQL code: \COPY m_anderson.actor_usr_unicorn ( l_user_id, l_user_altid, l_user_pin, l_user_profile, l_user_status, l_user_library, l_user_priv_granted, l_user_priv_expires, l_user_mailingaddr,
+# l_birthdate, l_last_name, l_first_name, l_middle_name, l_suffix_name, l_note, l_note1, l_patron, l_comment, l_staff, l_webcatpref, l_user_category1, l_user_category2, l_user_category3, l_user_category4, l_dept, l_guardian, l_license, l_ssn, l_misc, l_aup, l_photo,
+# l_notify_via, l_user_claims_ret, l_user_environment, l_user_department, l_ums_id, l_user_last_activity, l_placcard, l_user_email, l_addr1_std_line1, l_addr1_std_line2, l_addr1_std_city, l_addr1_std_state, l_addr1_std_zip, l_addr1_country, l_addr1_township,
+# l_addr1_room, l_addr1_company, l_addr1_office, l_addr1_phone, l_addr1_dayphone, l_addr1_homephone, l_addr1_workphone, l_addr1_cellphone, l_addr1_fax, l_addr1_email, l_addr1_location, l_addr1_usefor, l_addr1_care_of, l_addr1_known_bad, l_addr1_ums_addrid,
+# l_addr2_std_line1, l_addr2_std_line2, l_addr2_std_city, l_addr2_std_state, l_addr2_std_zip, l_addr2_country, l_addr2_township, l_addr2_room, l_addr2_company, l_addr2_office, l_addr2_phone, l_addr2_dayphone, l_addr2_homephone, l_addr2_workphone, l_addr2_cellphone,
+# l_addr2_fax, l_addr2_email, l_addr2_location,l_addr2_usefor, l_addr2_care_of, l_addr2_known_bad, l_addr2_ums_addrid, l_addr3_std_line1, l_addr3_std_line2, l_addr3_std_city, l_addr3_std_state, l_addr3_std_zip, l_addr3_country, l_addr3_township, l_addr3_room,
+# l_addr3_company, l_addr3_office, l_addr3_phone, l_addr3_dayphone, l_addr3_homephone, l_addr3_workphone, l_addr3_cellphone, l_addr3_fax, l_addr3_email, l_addr3_location, l_addr3_usefor, l_addr3_care_of, l_addr3_known_bad, l_addr3_ums_addrid, l_identific, l_noempl,
+# l_profession, l_program, l_represent, l_userid_active, l_inactive_barcode1, l_inactive_barcode2 ) FROM './users.data.tsv'
+
+# Process the records:
+for (my $u = 0; $u < @records; $u++) {
+
+ # Some fields can be mapped straightforwardly:
+ foreach $f (qw( user_id user_alt_id user_pin user_profile user_status user_library user_priv_granted user_priv_expires user_mailingaddr user_claims_ret user_environment user_department user_last_activity )) {
+ $records[$u]{uc($f)} '' unless defined $records[$u]{uc($f)};
+ $records[$u]{'l_' + $f} = $records[$u]{uc($f)};
+ }
+
+ # Addresses are a bit different:
+ foreach $a (qw( addr1 addr2 addr3 )) {
+ foreach $f (qw( std_line1 std_line2 std_city std_state std_zip country township room company office phone dayphone homephone workphone cellphone fax email location usefor care_of known_bad ums_addrid )) {
+ $records[$u]{uc('USER_' + $a + '.' + $f)} = '' unless defined $records[$u]{uc('USER_' + $a + '.' + $f)};
+ $records[$u]{'l_' + $a + '_' + '$f'} = $records[$u]{uc('USER_' + $a + '.' + $f)};
+ }
+ }
+
+ # FIXME: handle fields that don't exactly match (e.g. parse USER_NAME into l_last_name etc.)
+ # l_birthdate, l_last_name, l_first_name, l_middle_name, l_suffix_name, l_note, l_note1, l_patron, l_comment, l_staff, l_webcatpref, l_user_category1, l_user_category2, l_user_category3, l_user_category4, l_dept, l_guardian, l_license, l_ssn, l_misc, l_aup,
+ # l_photo, l_notify_via, l_ums_id, l_placcard, l_user_email, l_identific, l_noempl, l_profession, l_program, l_represent, l_userid_active, l_inactive_barcode1, l_inactive_barcode2
+
+ # We can parse the name like so:
+ # Copy the name to a temp value
+ # Strip off a prefix, if there is one
+ # Strip off a suffix, if there is one
+ # Strip off the family name (before the comma)
+ # Of what remains, whatever is before the first space is the first name and the rest is the middle name
+
+
+}
+
+
+
+
+# Print the records
+# -----------------
+# Print a header line
+# FIXME: don't print a serial, and do print the fields in the order above
+print "SERIAL\t";
+@sorted_fields = sort keys %unique_fields;
+foreach $i (@sorted_fields) {
+ print "$i\t";
+}
+print "\n";
+
+
+# Print the results
+for (my $u = 0; $u < @records; $u++) {
+ print "$u\t";
+ foreach $f (@sorted_fields) {
+ if (defined $records[$u]{$f}) {
+ print $records[$u]{$f};
+ }
+ print "\t";
+ }
+ print "\n";
+}
+
+print STDERR "Wrote " . scalar(@records) . " records.\n";
+# uh-bdee-uh-bdee-uh-bdee-uh- THAT'S ALL, FOLKS